ElASTOMER
ISO 1629 |
HARDNESS
Sh.A |
TEMPERATURE RANGE
°C |
HD Slippers compound |
Applications |
Butadiene-Nitrile
NBR |
50
60
70
75
80
85
90 |
-20 +110
-20 +110
-20 +110
-20 +110
-20 +110
-25 +100
-10 +110 |
N50-N050
N60-N045
N70-N003
N75-N011
N80-N046
N85-N116
N90-N047 |
Hydraulic oil, water up to 90°C, air up to 100°C, non-aromatic hydrocarbons, glycol and water/glycol mixtures |
70
75 |
-20 +110 |
N70-N049
N70-N028 |
As above along with a very low Compression Set. For non dynamic use only |
70
60 |
-30 +100
-40 +110 |
N70-N041
N60-N045 |
Ample temperature resistance range and very low Compression Set |
| 75 |
-20 +110 |
N75-N108 |
Hydraulic oil, water up to 90°C, air up to 100°C, non-aromatic hydrocarbons, glycol and water/glycol mixtures |
| 85 |
-22 + 100 |
N85-B115 |
FDA approved for food processing, pharmaceuticals and cosmetics |
Hydrogenated Nitrile-Butadiene
HNBR |
70
85 |
-25 +150 |
H70-N040
H85-N120 |
An even greater chemical resistance range in comparison to the normal NBR |
Polyurethane
AU |
95 |
-30 +105 |
P95-G114 |
Low friction coefficient, wear and hydraulic oil resistant, suitable for very high pressures |
| -40 +100 |
P95-N027 |
For injection moulding |
| -30 +105 |
P95-A112 |
Wear and hydraulic oil resistant, suitable for very high pressures |
| P95-B113 |
FDA approved for food processing, pharmaceuticals and cosmetics |
Fluoroelastomer
FPM |
70
75
85
90 |
-17 +230
-17 +230
-25 +210
-17 +230 |
V70-N006
V75-N037
V85-N117
V90-N010 |
High temperatures, aggressive chemicals, hydrocarbons, petrol, phosphoric esters, chlorinated hydrocarbons, high vacuum |
| 75 |
-17 +230 |
V75-N068 |
As above along with an improved resistance to aliphatic and aromatic hydrocarbons and ketones |
|
75
|
-35 +230
|
V75-N078
|
Low temperatures, methane and LPG |
|
85
|
-15 +210
|
V85-N137
|
Brake fluids, Sour Gas, Acids, Hydraulic oil and oils with aminic additives |
|
Perfluorated
FFKM
|
70 |
-10 +300 |
VF70-N132 |
Amines and aromatic solvents at high temperature |
| 75 |
-10 +260
-10 +330 |
VF75-N122
VF75-N123 |
Resistant to most chemical agents and steam |
| 75 |
-10 +260 |
VF75-B130 |
Food and Drug |
| 90 |
-10 +250 |
VF90-N124 |
Resistant to most chemical agents, steam and explosive decompression |
Propylene-Ethylene
EPDM |
70
80 |
-50 +150
-50 +150
|
E70-N052
E80-N053 |
Brake fluid, Phosphoric esters, diluted alkali, ketones, alcohols, water and steam up to 150°C |
| 85 |
-50 +130 |
E85-N118 |
Phosphoric esters, diluted alkali, ketones, alcohols,vine, water and steam up to 150°C |
70
85 |
-50 +150
-50 +100 |
E70-N110
E85-B134 |
Food and Drugs |
Chloroprene
CR |
70 |
-50 +150 |
C70-N054 |
Refrigerant gases, oils with a high aniline point, optimum resistance to atmospherical agents |
Silicone
MVQ |
50
60
70
80 |
-65 +230 |
S50-R055
S60-R056
S70-R030
S80-R057 |
Extreme temperatures, air and gas, oils with a high aniline point |
28
60
75
85 |
-40 +250
-60 +180
-60 +200
-55 +210 |
S28-R189
S60-T076
S75-R106
S85-R119 |
Food and Drug, FDA 177.2600 |
Fluoro-Silicone
MFQ |
70 |
-65 +175 |
L70-A048 |
Ample resistance to temperature, hydraulic oil, skydrol, hydrocarbons and gases |