A correct lubrication eliminates any inconvenience due to dry operational use, seasoning, the ageing of the elastomer and the sticking to countersurfaces when not in use.
O-Rings can be supplied pre-treated with a wide range of lubricants such as Molybdenum Disulfide, Graphite, HDxxx series of greases and Parker Super-O-Lubek
Contact our technical office for advise on the most suitable lubricant for your requirements.
Lubricants and fittings
Lubricants for Seals
OVERVIEW
|
Click on the product's code to access the data sheet, registration is required |
|
Commercial Type |
Chemical nature |
Temperature range |
Applications |
Pakage |
| Parker-O-Lube | mineral grease | -30 +120°C | Parker O-Lube is a mineral oil-based lubricant containing barium soap. It eases assembly and extends the service life of rubber seals. The best results are obtained when both the seal and its running surfaces are treated with the grease. Parker-O-Lube has a good resistance to water, adheres well to surfaces and offers good lubricating properties. It is particularly suitable for low pressure applications with slow dynamic reciprocating, oscillating or rotating motion. Parker-O-Lube is not recommended for systems with micro-filters or for seals which are not compatible with mineral oils (e.g. butyl, ethylene-propylene). | 55 g |
| Parker Super-O-Lube |
Silicone* | -55 +200°C | Parker’s Super O-Lube offers outstanding performance in service and has one of the most useful temperature ranges of any lubricant available. It can be used as an assembly lubricant as well as high pressure systems or vacuums. Its inert nature lends itself to a wide variety of fluid systems. And since there are no fillers, there is no clogging of micron filters. In addition to Super O-Lube’s outstanding performance in service, it also gives protection to rubber polymers that are normally age sensitive when exposed to the atmosphere. This is a typical concern with ozone sensitive polymers that require age control. | 55 g |
| HD005P | PTFE | -200 +260°C | Lubricant powder, particle size <=5micron, excellent thermal and chemical stability, FDA approved | 500 g |
| HD006P | PTFE | -200 +260°C | Lubricant powder, particle size <=10micron, excellent thermal and chemical stability, FDA approved | 500 g |
| HD010G | Grafite | -185 +450°C | EP anti seizing Lubricant powder, great thermal and chemical stability O-Rings coating |
100 g 500 g 1 Kg |
| HD150W | Silicone * | -55 +200°C | Multi-use lubricant, also allowed for alimentary use. NBR ageing protection, lubrication "for-life" of pneumatic components, high vacuum, water and "hard" water. Lubrication of plastic/plastic and plastic/metal couples | 100 g 500 g |
| HD300WP | Silicone * | -40 +200°C | For very low temperatures. NBR ageing protection, lubrication "for-life" of pneumatic components, high vacuum, water and "hard" water. Lubrication of plastic/plastic and plastic/metal couples Lubrication of structural bearings ptfe/inox (bridges, industrial refrigerators) |
100 g 500 g |
| HD400K | Syntetic Oil H1 | -30 +160 °C |
Synthetic Oil Calcium Soap Grease for lubricating seals and pneumatic components. |
100 g 500 g |
| HD900TF | PTFE | -70+120°C | Compatible with all elastomers, allowed for alimentary use, high vacuum, methane valves, great chemical resistance | 100 g 500 g |
| HD1800TF | PTFE | -30 +250°C | Compatible with all elastomers, allowed for alimentary use, great chemical resistance | 100 g 500 g |
| *NOTICE:Siliconical lubricants are not compatible to siliconic rubbers | ||||